- ‹Return|
- Torqeedo
- › Products
- ›Boat Speed Calculator
Boat Speed Calculator
Calculate speed, power consumption, runtime, and range for your electric displacement boat. Simply enter the key boat and propulsion data to get an estimate of performance on the water in seconds.
1. Enter boat data
The waterline length is the length of the boat hull at the water surface under normal load.
2. Select motor
No motor matches the calculated minimum power demand.
Hull speed
-
-
Waterline length
-
-
Total weight
-
-
3. Power demand / thrust
Speed/length -> kW -> km/h -> thrust in kg for 1-12 kn.
Show calculation table
| kn | Speed/length | kW | km/h | Thrust in kg |
|---|
Battery for selected motor
4. Recommended batteries
Please note: smaller batteries can limit motor power. A larger battery does not increase power; it only extends runtime.
Select at least one motor to see matching batteries.
5. Runtime / range
Runtime = battery size / kW, range = speed x runtime.
Show calculation table
| kn | kW | Runtime h | km/h | Range nm | Range km |
|---|
1. Enter boat data
The waterline length is the length of the boat hull at the water surface under normal load.
2. Select motor
Waterline length
-
-
Total weight
-
-
3. Planing hull - power over speed
Composite model from displacement power, hump resistance and the Crouch planing formula.
Show calculation table
| kn | km/h | W | Phase |
|---|
4. Select propeller
5. Propeller Speed Calculator
Motor RPM, gear ratio and pitch come from the selected motor specs; pitch x RPM gives theoretical speed and slip variants.
Motor RPM
6000.0 rpm
Gear ratio
5.0
Pitch in inches
10.5"
Prop RPM
-
Theoretical
-
-
20% slip
-
-
Show calculation table
| Slip | km/h | kn |
|---|
6. Prop RPM / speed table
Speed over prop RPM for 10%, 20%, 30% and 40% slip.
Show calculation table
| Prop RPM | 10% slip km/h | 20% slip km/h | 30% slip km/h | 40% slip km/h | 10% slip kn | 20% slip kn | 30% slip kn | 40% slip kn |
|---|
Displacement formulas: Hull Speed = 2.43 x sqrt(waterline length); kW = (total weight in kg x 2.20462 / (10.665 / speed-length)^3) / 1.36.
Planing formulas: Prop-Speed = RPM x Pitch x 60 / 1000 x 0.0254; slip factors 0.9/0.8/0.7/0.6.
Performance Estimate Disclaimer
The runtime, speed, and range values provided by this tool are estimates based on mathematical models and the information entered by the user. They are intended solely for guidance and product selection purposes and do not constitute guaranteed performance values.
Actual runtime, speed, and range may vary significantly depending on factors including vessel configuration, hull condition, payload, battery condition and state of charge, propeller configuration, wind, current, water conditions, weather, temperature, and other operating factors.
These estimates should not be used as the sole basis for navigation, trip planning, or safety-related decisions. Users should always consider actual operating conditions and maintain an appropriate energy reserve.
Where available, performance data from comparable vessels and operating conditions should be considered in addition to the results provided by this tool.