- Maximum efficiency outboard with tiller control
- Improved robustness and improved corrosion protection
- 3,000 W input power, in terms of propulsion is comparable with a 6-hp petrol outboard
- Integrated on-board computer with GPS-based range calculation
- Item number: 1264-00 | EAN: 4260113696750
- Equipment included: Outboard with tiller control, cable set (S: 4.0m L: 4.12m, 35 mm²) including main switch and propeller B 12 x 10,5 WDR, emergency magnetic stop key
- Take a look at our Cruise Info Tool for helpful information
- Warranty: 2 years for non-commercial use
We currently deliver to the following countries
- California residents please click here for Prop 65 warning
Products for Cruise 3.0 TS
Cruise 3.0 T
The new Cruise 3.0 T is a 6 horsepower-equivalent drive system for sailboats up to 30 feet or displacement hulls up to 3 tons.This lightweight electric drive system runs on 24-volts (not included) and is best paired with one or more Power 24-3500 lithium-ion batteries.
Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users.
All Cruise systems have a built-in GPS with onboard computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon with advanced helical gear design.
Also available in remote-steered and fixed pod models.
Cruise 3.0 T - Benefits:
- High-efficiency outboard with 3,000 W input power, equivalent to a 6 HP petrol outboard
- Pair with Power 24-3500 for best performance and accurate range/runtime functionality
- Cruise 3.0 recommended for dinghies and sailboats up to 3 tons
- T model is equipped with tiller control with integrated display screen and magnetic kill switch (included in scope of delivery)
- Rugged pylon with integral fin – extra protection when running aground
- Highest-grade seawater-proof aluminum, hard-anodized for long service life, even in the harshest conditions
- Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties - ships with anode set for fresh and saltwater
- Also compatible with third-party batteries (24-volt) but careful matching to motor power requirements is needed
The on-board computer display provides information on the most important performance data
Available with short or long shaft – as you need
Impact-resistant aluminium integral fin
Rugged: aluminium housing with shaft sealant rings on the inside
Optimised propeller design: For greater thrust or more speed
Technical Data Cruise
Cruise 3.0 T Input power in watts 3000 Propulsive power in watts 1530 Comparable petrol outboards (propulsive power) 6 HP Comparable petrol outboards (thrust) 8 HP Maximum overall efficiency in % 51 Static thrust in lbs* 142 Integrated battery - Nominal voltage 24 Final charging voltage - Total weight in kg 19.7 (S) / 20.2 (L) Motor weight without battery in kg - Weight of integrated battery - Shaft length in cm 62.5 (S) / 75.5 (L) Standard propeller
v = speed in km/h at p = power in watts
Propeller B 12 x 10,5 WDR Alternative propeller options Propeller Guide Maximum propeller speed in rpm 1100 Control Tiller TorqLink No Steering 360° lockable Tilting device Manual with grounding protection Tilt angle 61,3° Trim device Manual, 4-step Integrated on-board computer Yes Stepless forward/reverse drive Yes* Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.
Cruise R/T Operating InstructionsOperating Instructions Cruise 3.0 / 6.0 R/T - German / English
Operating Instructions Cruise 3.0 / 6.0 R/T - Danish / Dutch
Operating Instructions Cruise 3.0 / 6.0 R/T - Spanish / Portuguese
Operating Instructions Cruise 3.0 / 6.0 R/T - French / Italian
Operating Instructions Cruise 3.0 / 6.0 R/T - Swedish / Norwegian / Finnish
Declaration of Conformity
Your information material – Everything at a glance
You will find all important information about the Cruise in our digital brochure. Download the PDF quickly and easily or read it conveniently online while protecting the environment.
Cruise 3.0 T FAQ
Which Cruise for which boat?
All Cruise models are suitable for inflatables and other small boats.
For dinghies and sailboats up to 3 tons, we recommend the Cruise 3.0. The Cruise 6.0 easily propels up to 8 tons.
Is the on-board computer compatible with my lead batteries?
Yes, but with limitations.
If the Cruise is operated with lead batteries the charge status indicator (and with it the remaining range indicator) is based on estimates derived from battery information entered during initial motor setup.
What are the advantages of the Power 24-3500 lithium battery for the Cruise?
As a lithium battery, the Power 24-3500 provides far greater performance with lower weight than conventional lead batteries. In other words, it does not weigh down your boat unnecessarily – and you benefit in terms of range and power.
Additionally, the integrated battery electronics of the Power 24-3500 are designed to communicate with the on-board computer, meaning that the values provided by the battery such as remaining range and capacity are always exact.
What does the on-board computer do?
The on-board computer, which is integrated in the remote throttle with the Cruise R and in the tiller with the Cruise T, analyses information from the motor and combines it with GPS data.
Motor consumption and GPS speed are always exact.
When the Cruise is operated with the Power 24-3500, the information on the battery and on range with remaining capacity is also exact because both products communicate with each other. That is very convenient.
What is the warranty on the Cruise?
The Cruise models have 2-year warranty from the date of purchase for non-commercial use.